Disassembly/Repair of the mobile device Samsung Galaxy A30s SM-A307 (Samsung Galaxy A30s SM-A307F/DS, SM-A307FN/DS (Global); SM-A307G/DS (LATAM), SM-A307GN/DS (APAC), SM-A307GT/DS (Brazil)) with each step description and the required set of tools.
Views
Likes
Share
Questions
Step 1.
Using the key tool, open the SIM and Micro SD cards tray and remove it.
⚠ Warning!
Do not push too hard this may cause damage.
Step 2.
Open the back cover.
⚠ Warning!
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Step 3.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 14 screws.
Step 4.
Pry and remove the middle frame.
Step 5.
Disconnect the battery connector. The battery model of Samsung Galaxy A30s is EB-BA505ABU.
⚠ Warning!
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Step 6.
Disconnect connectors and remove the inter-board cable.
Step 7.
Disconnect connectors on the daughterboard.
Step 8.
Remove the daughterboard, also known as sub-board.
Step 9.
Disconnect the connector on PCB, and remove the front (selfie) camera.
Step 10.
Отсоединяем коннектор коаксиального кабеля.
Step 11.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 screw in the PCB.
Step 12.
Remove the PCB.
Step 13.
Disconnect the connectors on PCB, and remove the three rear cameras assembly.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Views
Likes
Share
Questions