Disassembly/Repair of the mobile device Samsung Galaxy Ace 2 GT-i8160 (Samsung Galaxy Ace II X S7560M (Bell Canada)) with each step description and the required set of tools.

5828

Views

—

Share

0

Questions

Vadim Popoff

Content manager / Author / Content specialist

Content specialist with over 10 years of experience in the technology industry.

Step 1.

Open the back cover

Open the back cover.


Step 2.

Remove the battery

Lift and remove the battery.


Step 3.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts in the frame of the phone.


Step 4.

Open the mid-frame

Pry and remove the middle frame.


Step 5.

In the middle cover

The middle frame.


Step 6.

Remove the vibration motor

Disconnect connectors on the PCB and pry up the vibration motor.


Step 7.

Turn over the PCB

Overturn the board, disconnect the connector from the inside and remove it.


Step 8.

Remove the headphone port

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the headphone jack/socket.


Step 9.

Remove the earpiece speaker

Pry and remove the cable with a earpiece speaker and proximity sensor.


Step 10.

In the display frame remained

Parts are in the frame of the display module.


Evgenii Kuzmin

Evgenii Kuzmin

Senior maintenance service and repair engineer

Disassembling\Repair has easy complexity and takes about 3 minutes in time. Our manual is suitable for all models Samsung Galaxy Ace 2 GT-i8160 or Samsung Galaxy Ace II X S7560M (Bell Canada) released for markets in different countries.
Detailed disassembly instructions of Samsung Galaxy Ace 2 GT-i8160 in the video, made by our mobile repair & service center:

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

logo

5828

Views

—

Share

0

Questions