Recommended tools

Screwdriver Phillips #000

Opening tool / Spudger

Tweezers

Disassembly/Repair of the mobile device Samsung Galaxy Note 10.1'' GT-N8000 (Samsung Galaxy Note 800, Samsung Galaxy Note 10.1 3G & WiFi) with each step description and the required set of tools.

17707

Views

Likes

—

Questions

Vadim Popoff

Content manager / Author / Content specialist

Content specialist with over 10 years of experience in the technology industry.

Step 1.

Open the cover

Open the cover hiding the screws.

Step 2.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts securing the back cover.

Step 3.

Open the back cover

Open the back cover.

Step 4.

Disconnect the battery connector

Disconnect the battery connector.

⚠ Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Step 5.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts securing the charging port.

Step 6.

Remove the charging port

Disconnect the connector and remove the cable with a charging port and microphone.

Step 7.

Disconnect the connectors

Disconnect connectors on the PCB.

Step 8.

Remove the cable

Turn over the FFC (flexible flat cable), disconnect the connector and remove it.

Step 9.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 10 bolts securing the battery.

Step 10.

Remove the battery

Lift and remove the battery.

Step 11.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts in the PCB.

Step 12.

Remove the small board

Pry up the connectors on PCB and remove the small boards with SIM and Micro SD card holders. The right board with a vibration motor.

Step 13.

Remove the cameras

Disconnect connectors on PCB and remove the main and front (selfie) cameras.

Step 14.

Disconnect the connectors

Disconnect connectors on the PCB.

Step 15.

Remove the motherboard

Remove the PCB.

Step 16.

Remove the loudspeaker

Pry and remove the buzzer (speaker) assembly.

Step 17.

Remove the loudspeaker

Pry and remove the buzzer (speaker) assembly.

Step 18.

Remove the headphone port

Pry up the connector on PCB and remove the headphone jack/socket and flash.

Step 19.

In the display frame remained

Parts are in the frame of the display module.

Evgenii Kuzmin

Senior maintenance service and repair engineer

Disassembling\Repair has hard complexity and takes about 15 minutes in time. Our manual is suitable for all models Samsung Galaxy Note 10.1'' GT-N8000 or Samsung Galaxy Note 800, Samsung Galaxy Note 10.1 3G & WiFi released for markets in different countries.

#instructions #Samsung #Samsung Galaxy Note 10.1'' GT-N8000