Disassembly/Repair of the mobile device Samsung Galaxy Note 5 SM-N920 (Samsung N9208 (Hong Kong, Philippines, Malaysia, Taiwan); N920C/N920CD (South Africa, UAE, Pakistan, Russia, Kazakhstan)) with each step description and the required set of tools.
Views
Likes
Share
Questions
Step 1.
Using the key tool, open the SIM card tray and remove it.
⚠ Warning!
Do not push too hard this may cause damage.
Also, pull out the stylus pen.
Step 2.
Open the back cover.
⚠ Warning!
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Step 3.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 20 bolts in the frame of the phone.
Step 4.
Pry and remove the middle frame with NFC tag.
Step 5.
Disconnect connectors on the PCB.
Step 6.
Lift up the board, disconnect the inter-board connector from the inside and remove it.
Step 7.
Parts are in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Views
Likes
Share
Questions