Disassembly/Repair of the mobile device Samsung Galaxy Note 9 SM-N960 (Samsung SM-N960, SM-N9600 China; SM-N9608 Hong Kong, Macao, Taiwan; SM-N960J, SM-N960D Japan; SM-N960F, SM-N960FD Europe, Asia (partly), Latin America (partly), AU&OC; SM-N960K, SM-N960L, SM-N960N, SM-N960S South Korea; SM-N960P, SM-N960U, SM-N960U1) with each step description and the required set of tools.

Using the key tool, open the SIM card tray and remove it.

⚠ Warning!

Do not push too hard this may cause damage.

Pull the touch pen (stylus) out.

Open the back cover.

⚠ Warning!

For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 16 bolts in the frame of the phone.

Pry and remove the covers with antennas and NFC.

Disconnect the battery connector.

⚠ Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Disconnect connector on the PCB and remove the front (selfie) camera.

Disconnect connector on the PCB and remove the front (selfie) camera.

Disconnect connectors on the PCB.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts in the PCB.

Remove the PCB.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts securing the charging port.

Pry & remove the cable with charging port and microphone.

Parts in the frame of the display module.