Russian
Open the back cover.
Teardown difficulty:
Moderate
Moderate
Duration:
14 min
14 min
Recommended tools
Disassembly of the mobile device Samsung Galaxy Note SGH-i717 (Samsung Galaxy Note 4G, Samsung SGH-I717, Samsung Galaxy Note LTE) with each step description and the required set of tools.
Step 1
Step 2
Pull the S pen out (AKA stylus).
Step 3
Remove the battery. The battery model of the Samsung Galaxy Note is EB615268VU.
Step 4
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 9 screws.
Step 5
Pry and remove the middle frame.
Step 6
Pry up the connectors and remove the board with Sim & Micro SD holders.
Step 7
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 screws securing the loudspeaker assembly.
Step 8
Pry and remove the buzzer (loudspeaker) assembly.
Step 9
Disconnect connectors on the PCB.
Step 10
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 screw.
Step 11
Remove the PCB.
Step 12
Disconnect the connector on PCB, and remove the main camera.
Step 13
Remove the daughterboard, also known as sub-board.
Step 14
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 screws securing the headphone jack/socket.
Step 15
Remove the bracket.
Step 16
Remove the assembly of the headphone jack/socket and earpiece speaker.
Step 17
Remove the assembly of the front (selfie) camera and proximity sensor.
Step 18
Parts are in the frame of the display module.
Detailed disassembly instructions of Samsung Galaxy Note SGH-i717 in the video, made by our mobile repair & service center:
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Disassembling\Repair has medium complexity and takes about 14 minutes in time.
Our manual is suitable for all models Samsung Galaxy Note SGH-i717 — Samsung Galaxy Note 4G, Samsung SGH-I717, Samsung Galaxy Note LTE released for markets in different countries.
Back to the list
