Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Samsung Galaxy Round SM-G910S with each step description and the required set of tools.
4261
Views
0
Likes
—
Share
3
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Remove the battery
Lift and remove the battery.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 12 bolts in the frame of the phone.
Step 4.
Open the mid-frame
Pry and remove the middle frame.
Step 5.
Remove the small board
Pry up the connector and remove the small board with Sim holder and volume buttons cable.
Step 6.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 7.
Remove the motherboard
Remove the PCB.
Step 8.
Remove the sub-board
Remove the lower board with charging port.
Step 9.
Remove the bracket
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket.
Step 10.
Remove the headphone port
Pry & remove the headphone jack/socket and front (selfie) camera.
Step 11.
Remove the cable
Pry and remove cable with earpiece (speaker) and proximity sensor.
Step 12.
In the display frame remained
Parts are in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
4261
Views
0
Likes
—
Share
3
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Samsung instructions most liked by readers
New instructions
Check our
New Samsung brand instructions on vrm24.com
