Disassembly/Repair of the mobile device Samsung Galaxy S3 GT-i9300 with each step description and the required set of tools.
Views
Likes
Share
Questions
Step 1.
Open the back cover.
Step 2.
Lift and remove the battery.
Step 3.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 10 bolts in the frame of the phone.
Step 4.
Pry and remove the middle frame.
Step 5.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the board with SIM and Micro SD card holders.
Step 6.
Pry up the connector and remove the buzzer (speaker) assembly.
Step 7.
Disconnect connectors on the PCB and remove it.
Step 8.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket & cable with front (selfie) camera and proximity sensor.
Step 9.
Remove the volume buttons keys, antenna board and coaxial cable.
Step 10.
Remove the cable with an earpiece (speaker) and volume buttons.
Step 11.
Pry & remove the vibration motor.
Step 12.
Parts are in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Views
Likes
Share
Questions