Heat gun
Phillips #000
Opening tool
Tweezers
Needle
Open the back cover.
Lift and remove the battery.
Remove the cover.
Pry up the connector of the android navigation control buttons.
Separate the display module from the cover.
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Also, the display connector is inside.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts in the frame of the phone.
Remove the upper cover.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 10 bolts.
Pry and remove the middle frame.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the PCB.
Pry up the coaxial cable connectors. Lift up the PCB. Disconnect the inter-board connector from the inside and remove the board.
Pry up the clips.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt.
Pry up connectors and remove the coaxial cables.
Remove the PCB.
The frame.
Disassembling\Repair has hard complexity and takes about 4 minutes in time.
Our manual is suitable for all models Samsung Galaxy S5 SM-G900 — Samsung G900F (Europe), G900I (Asia, Australia), G900M (Vodafone), G900A (AT&T), G900T (T-Mobile), G900W8 (Canada), G900K/G900L/G900S (Korea) released for markets in different countries.
en
ru
