Recommended tools
Heat gun
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Samsung Galaxy S7 Edge SM-G935 (Samsung G935F (Global); G935FD (Southeast Asia, India); G9350 (Hong Kong); G935W8 (Canada)) with each step description and the required set of tools.
20352
Views
10
Likes
—
Share
28
Questions
Step 1.
Remove the tray
Using the key tool, open the SIM card tray and remove it.
⚠ Warning!
Do not push too hard this may cause damage.
Step 2.
Open the back cover
Open the back cover.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 12 bolts in the frame of the phone.
Step 4.
Open the cover
Remove the upper cover.
Step 5.
Remove the frame
Remove the frame with NFC tag.
Step 6.
Remove the loudspeaker
Pry and remove the buzzer (speaker) assembly.
Step 7.
Disconnect the battery connector
Disconnect the battery connector.
⚠ Warning!
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Step 8.
Remove the front camera
Disconnect the connector on PCB, and remove the front (selfie) camera.
Step 9.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 10.
Remove the motherboard
Lift up the PCB. Disconnect the connector from the inside and remove the main PCB.
Step 11.
In the display frame remained
Parts are in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
20352
Views
10
Likes
—
Share
28
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Samsung instructions most liked by readers
New instructions
Check our
New Samsung brand instructions on vrm24.com
