Screwdriver Phillips #000
Opening tool
Tweezers
Open the back cover.
Disconnect the battery connector. The battery model of Samsung Galaxy Tab S 10.5'' is EB-BT800FBE.
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 screws securing a charging port.
Pry up the connectors and remove the cable with a charging port and Micro SD holder.
Pry up the connector and remove the cable with a Sim Card holder.
Disconnect the connector and remove the cable with a microphone.
Pry up the inter-board cable connector.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 screws securing the battery.
Remove the battery.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 screws and remove the bracket holding the headphone jack/socket.
Remove the assembly with a loudspeaker, volume/power buttons, and a headphone jack/socket.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 screw securing the loudspeaker assembly.
Remove the assembly with a loudspeaker and vibration motor.
Disconnect connectors on PCB and remove the main and front (selfie) cameras.
Pry up the proximity sensor.
Remove the PCB.
Parts are in the frame of the display module.
Disassembling\Repair has medium complexity and takes about 14 minutes in time.
Our manual is suitable for all models Samsung Galaxy Tab S 10.5'' SM-T805 — Samsung Galaxy Tab S 10.5'' SM-T805, SM-T800 released for markets in different countries.
en
ru
