Open the back cover.
⚠️ Warning!
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Author, currently - Quality Assurance Specialist
Open the back cover.
⚠️ Warning!
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Using a screwdriver (hex T5), unscrew 2 bolts and a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.