Disassembly/Repair of the mobile device Xiaomi Amazfit Pace (Xiaomi Amazfit Pace A1612) with each step description and the required set of tools.

We recommend using a special heating device such as a separator machine, heat gun, or heating mat. It will simplify the process. You can use a home hairdryer, but you will have to make a nozzle by hand or have a suitable one in the kit to gently heat and concentrate the heat flow in the right place.

ℹ️️ The surface of the back cover must be heated to soften the adhesive underneath. The approximate heating temperature is 50° C / 125° F.

Use a thin plastic film or pick for separation.

Do not use a lever or any force for separation that could damage the elements inside.

Pry up the connectors of the display cable, touchscreen cable, battery cable, cables for sensors.

Using a screwdriver (Philips 1.5 mm PH #000), unscrew the four screws.

Carefully remove the printed circuit board. There is no need to use a lever or try to reach the circuit board by force. Make sure that nothing is getting in the way or holding the circuit board.

The motherboard, also, may be attached with attachments like latches or hooks, be careful.

⚠️️ Do not bend the circuit board when removing it or push tools under it. Unbeknownst to yourself, you can damage components or cables from the inside.

In the housing remained: battery, vibration motor.