en
ru
Teardown difficulty:
Moderate

Recommended tools

Disassembly of the mobile device Xiaomi Redmi Note 8T (Xiaomi Redmi Note 8T M1908C3XG) with each step description and the required set of tools.


Specialist in content creation, distribution and content management.


How to disassemble Xiaomi Redmi Note 8T, Step 1/1 How to disassemble Xiaomi Redmi Note 8T, Step 1/2
Step 1

Using the key tool, open the SIM and Micro SD cards tray and remove it.

Warning!

Do not push too hard this may cause damage.

How to disassemble Xiaomi Redmi Note 8T, Step 2/1 How to disassemble Xiaomi Redmi Note 8T, Step 2/2
Step 2

Open the back cover and turn it over.

Warning!

For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.

How to disassemble Xiaomi Redmi Note 8T, Step 3/1 How to disassemble Xiaomi Redmi Note 8T, Step 3/2
Step 3
Pry up the fingerprint sensor connector and remove the cover.
How to disassemble Xiaomi Redmi Note 8T, Step 4/1 How to disassemble Xiaomi Redmi Note 8T, Step 4/2
Step 4
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 10 screws.
How to disassemble Xiaomi Redmi Note 8T, Step 5/1 How to disassemble Xiaomi Redmi Note 8T, Step 5/2
Step 5
Remove the cover with a protective film.
How to disassemble Xiaomi Redmi Note 8T, Step 6/1 How to disassemble Xiaomi Redmi Note 8T, Step 6/2
Step 6

Disconnect the battery connector. The battery model of Xiaomi Redmi Note 8T is BN46.

Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

How to disassemble Xiaomi Redmi Note 8T, Step 7/1 How to disassemble Xiaomi Redmi Note 8T, Step 7/2
Step 7
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 screws.
How to disassemble Xiaomi Redmi Note 8T, Step 8/1 How to disassemble Xiaomi Redmi Note 8T, Step 8/2
Step 8
Pry and remove the buzzer (loudspeaker) assembly.
How to disassemble Xiaomi Redmi Note 8T, Step 9/1 How to disassemble Xiaomi Redmi Note 8T, Step 9/2
Step 9

Disconnect connectors and remove the inter-board cable.

How to disassemble Xiaomi Redmi Note 8T, Step 10/1 How to disassemble Xiaomi Redmi Note 8T, Step 10/2
Step 10
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 screw in the daughterboard.
How to disassemble Xiaomi Redmi Note 8T, Step 11/1
Step 11
Disconnect connectors on the daughterboard.
How to disassemble Xiaomi Redmi Note 8T, Step 12/1 How to disassemble Xiaomi Redmi Note 8T, Step 12/2
Step 12
Remove the daughterboard, also known as sub-board.
How to disassemble Xiaomi Redmi Note 8T, Step 13/1 How to disassemble Xiaomi Redmi Note 8T, Step 13/2
Step 13
Disconnect connectors on PCB and remove the three rear camera assembly.
How to disassemble Xiaomi Redmi Note 8T, Step 14/1 How to disassemble Xiaomi Redmi Note 8T, Step 14/2
Step 14
Disconnect the connector on PCB, and remove the front (selfie) camera.
How to disassemble Xiaomi Redmi Note 8T, Step 15/1 How to disassemble Xiaomi Redmi Note 8T, Step 15/2
Step 15
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 screws in the PCB.
How to disassemble Xiaomi Redmi Note 8T, Step 16/1
Step 16
Disconnect connectors on the PCB.
How to disassemble Xiaomi Redmi Note 8T, Step 17/1 How to disassemble Xiaomi Redmi Note 8T, Step 17/2
Step 17
Remove the PCB.
How to disassemble Xiaomi Redmi Note 8T, Step 18/1 How to disassemble Xiaomi Redmi Note 8T, Step 18/2
Step 18
Disconnect the connector on PCB, and remove the main camera.

Detailed disassembly instructions of Xiaomi Redmi Note 8T in the video, made by our mobile repair & service center:


Disassembling\Repair has medium complexity and takes about 8 minutes in time.
Our manual is suitable for all models Xiaomi Redmi Note 8T — Xiaomi Redmi Note 8T M1908C3XG released for markets in different countries.



Ask a question