Open the back cover.
For careful separation, we recommend using a hairdryer. At the same time, it is necessary to heat carefully in order not to damage the surface of the device.
Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 22 bolts in the frame of the phone.
Pry and remove the middle frame.
Remove the protective film and battery connector.
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Disconnect the connector on the lower PCB.
Remove the lower PCB.
Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 2 bolts in the PCB.
Disconnect the connectors on PCB.
Remove the PCB.
Parts in the frame of the display module.