en
ru
es
it
fr
de
pt

Teardown difficulty:
Easy

Recommended tools

Huawei Honor 7X Teardown

Step 1

Using the key tool, open the SIM card and MMC card tray and remove it.

Warning!

Do not push too hard this may cause damage.

Step 2

Using a screwdriver (Star Shape 0.8mm Pentalobe), unscrew the 2 bolts on the end of the phone.

Step 3

Open the back cover.

Step 4

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket holds the connectors.

Step 5

Pry up the fingerprint sensor connector on the PCB.

Step 6

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holds the connectors.

Step 7

Disconnect the battery connector.

Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Step 8

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts in the lower parts.

Step 9

Pry and remove the buzzer (speaker) assembly.

Step 10

Remove the bracket.

Step 11

Disconnect connectors and remove inter-board cable.

Step 12

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the lower PCB.

Step 13

Disconnect the connector of the coaxial cable and remove the board.

Step 14

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts and remove the bracket holds the connectors.

Step 15

Disconnect connectors on the PCB and remove the two main cameras.

Step 16

Disconnect connector on the PCB and remove the front (selfie) camera.

Step 17

Disconnect connectors on the PCB.

Step 18

Remove the PCB.

Step 19

Parts in the frame of the display module.

Disassembly Video