en
ru
es
it
fr
de
pt

Teardown difficulty:
Easy

Recommended tools

Huawei Honor 7A Pro Teardown

Step 1

Using the key tool, open the SIM card tray and remove it.

Warning!

Do not push too hard this may cause damage.

Step 2

Open the back cover.

Step 3

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts and remove the brackets hold the connectors.

Step 4

Disconnect connectors of the fingerprint sensor and battery on the board.

Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Step 5

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts in the lower part.

Step 6

Pry and remove the buzzer (speaker) assembly.

Step 7

Disconnect connectors on the lower PCB and remove it.

Step 8

Disconnect the connector and remove inter-board cable.

Step 9

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts in the PCB.

Step 10

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket holds the main camera.

Step 11

Disconnect connector on the PCB and remove the main camera.

Step 12

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket holds the headphone jack/socket.

Step 13

Disconnect connector on the PCB and remove the front (selfie) camera.

Step 14

Disconnect connectors on the PCB.

Step 15

Remove the PCB.

Step 16

Parts in the frame of the display module.

Disassembly Video