Open the back cover.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 10 bolts in the upper part.
Remove the cover.
Disconnect the battery connector.
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 6 bolts in the lower part.
Remove the lower cover.
Disconnect connectors on the lower PCB and remove it.
Disconnect connector on the PCB and remove the main camera.
Disconnect connectors on the PCB.
Remove the PCB.
Parts in the frame of the display module.