en
ru
es
it
fr
de
pt

Teardown difficulty:
Easy

Recommended tools

Huawei Honor 9 Lite Teardown

Step 1

Using the key tool, open the SIM card slot and remove it.

Warning!

Do not push too hard this may cause damage.

Step 2

Open the back cover.

Warning!

For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.

Step 3

Disconnect the fingerprint sensor connector on the cable on the back cover.

Step 4

Using a screwdriver (Phillips 1.5 mm), unscrew 1 bolt and remove the holder of the connectors.

Step 5

Using a screwdriver (Phillips 1.5 mm), unscrew 2 bolts and remove the holder of the battery connector.

Step 6

Disconnect the battery connector.

Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Step 7

Using a screwdriver (Phillips 1.5 mm), unscrew 1 bolt and remove the holder of the connectors.

Step 8

Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 3 bolts.

Step 9

Remove the protective panel.

Step 10

Disconnect connectors and remove the fingerprint sensor cable.

Step 11

Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 9 bolts at the bottom part.

Step 12

Remove the protection of connectors.

Step 13

Remove the lower part with the buzzer (speaker).

Step 14

Remove the connectors on the bottom PCB.

Step 15

Remove the lower PCB.

Step 16

Disconnect the connectors on the PCB and remove the paired main camera.

Step 17

Disconnect the connectors on the PCB and remove the paired front (selfie) camera.

Step 18

Disconnect the connectors on PCB.

Step 19

Remove the PCB.

Step 20

Parts in the frame of the display module.

Disassembly Video