en
ru
es
it
fr
de
pt

Teardown difficulty:
Moderate

Recommended tools

Huawei Honor View 10 Teardown

Step 1

Using the key tool, open the SIM card slot and remove it.

Warning!

Do not push too hard this may cause damage.

Step 2

Separate the display module and gently overturn it.

Warning!

For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.

Step 3

Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 1 bolt and remove the holder of connector.

Step 4

Disconnect the connector and remove the display module.

Step 5

Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 13 bolts.

Step 6

Take out the panel with the printed circuit board and the other parts, from the housing.

Step 7

Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 3 bolts and remove the cover of connectors.

Step 8

Disconnect the connector and remove the lower part with speaker (buzzer).

Step 9

Disconnect the connectors on the PCB and remove the protection of the headphone jack.

Step 10

Remove the lower PCB.

Step 11

Remove the headphone jack.

Step 12

Disconnect the connectors on the PCB.

Step 13

Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 1 bolt and remove the holder of the camera connector.

Step 14

Disconnect the connector on the PCB and remove the paired main camera.

Step 15

Disconnect the connector on PCB and remove the front (selfie) camera.

Step 16

Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 1 bolt in the PCB.

Step 17

Remove the PCB.

Step 18

Parts in the frame.

Disassembly Video