Open the back cover.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 15 bolts in the frame of the phone.
Using a screwdriver (hex T4), unscrew 4 bolts in the frame of the phone.
Pry and remove the middle frame.
Disconnect the battery connector.
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Disconnect connectors and remove the inter-board cable.
Pry and remove the buzzer (speaker) assembly.
Disconnect the connector on the PCB.
Remove the lower PCB.
Disconnect connectors on the PCB.
Disconnect connector on the PCB and remove the front (selfie) camera.
Remove the PCB.
Parts are in the frame of the display module.