en
ru
es
it
fr
de
pt

Teardown difficulty:
Hard

Recommended tools

Land Rover HG11A Teardown

Land Rover HG11A, Step 1/1 Land Rover HG11A, Step 1/2
Step 1

Separate the display module from the cover.

Warning!

For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.

Land Rover HG11A, Step 2/1 Land Rover HG11A, Step 2/2
Step 2

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket holding the connectors.

Land Rover HG11A, Step 3/1 Land Rover HG11A, Step 3/2 Land Rover HG11A, Step 3/3
Step 3

Pry up the connector and remove the display module.

Land Rover HG11A, Step 4/1 Land Rover HG11A, Step 4/2
Step 4

Using a tweezers, open the SIM and Micro SD cards tray and remove it.

Land Rover HG11A, Step 5/1 Land Rover HG11A, Step 5/2
Step 5

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 11 bolts in the frame of the phone.

Land Rover HG11A, Step 6/1 Land Rover HG11A, Step 6/2
Step 6

Pry and remove the middle cover.

Land Rover HG11A, Step 7/1 Land Rover HG11A, Step 7/2
Step 7

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the lower PCB.

Land Rover HG11A, Step 8/1 Land Rover HG11A, Step 8/2 Land Rover HG11A, Step 8/3
Step 8

Pry up the connector of the inter-board cable on the main board, coaxial cable connector on the lower one, unsolder the wires of the vibration motor, and remove the lower PCB with the inter-board cable.

Land Rover HG11A, Step 9/1 Land Rover HG11A, Step 9/2
Step 9

Disconnect the connector on PCB, and remove the front (selfie) camera.

Land Rover HG11A, Step 10/1 Land Rover HG11A, Step 10/2
Step 10

Overturn the board, disconnect the connectors from the inside and remove it.

Land Rover HG11A, Step 11/1 Land Rover HG11A, Step 11/2
Step 11

Separate the battery from the frame.

Disassembly Video


Ask a question