Open the back cover.
Lift and remove the battery.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts in the frame of the phone.
Pry and remove the middle frame.
The middle frame.
Disconnect connectors on the PCB and pry up the vibration motor.
Overturn the board, disconnect the connector from the inside and remove it.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the headphone jack/socket.
Pry and remove the cable with a earpiece speaker and proximity sensor.
Parts are in the frame of the display module.