Separate the LCD from the case/housing.
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Lift the LCD and remove the bracket holds the connector.
Disconnect the connector and remove the LCD.
Using the key tool, open the SIM card & memory card slots and remove them.
Do not push too hard this may cause damage.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 17 bolts in the frame of the phone.
Separate the middle frame and the back cover.
Disconnect connectors on the PCB.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.
Disconnect connector on the PCB and remove the front (selfie) camera.
Remove the PCB.
Parts in the frame of the display module.