Using the key tool, open the SIM card and micro sd card slots and remove them.
Do not push too hard this may cause damage.
Open the back cover.
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 16 bolts in the panels of the phone.
Pry and remove the pannels.
Disconnect the battery connector.
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Disconnect the connector on PCB and remove the main paired camera.
Disconnect the connector on the PCB and remove the jack socket.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts in the PCB.
Disconnect the connector on the PCB.
Remove the PCB.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts securing the part with speaker.
Pry and remove the part with speaker.
Parts in the frame of the display module and PCB.