Open the back cover.
Disconnect the battery connector.
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Peel off the protective stickers, pry up the connectors and remove inter-board cable.
Remove the protective stickers.
Disconnect connectors on the PCB.
Disconnect the connector on PCB, and remove the main camera.
Disconnect the connector on PCB, and remove the front (selfie) camera.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts in the PCB.
Remove the PCB.
Parts are in the frame of the display module.