en
ru
es
it
fr
de
pt

Teardown difficulty:
Moderate

Recommended tools

Sony Xperia XZ2 Teardown

Step 1

Open the SIM cards tray and remove it.

Step 2

Separate the display module from the cover.

Warning!

For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.

Step 3

Remove the bracket.

Step 4

Pry up the connector and remove the display module.

Step 5

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 14 bolts in the frame of the phone.

Step 6

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 short bolts.

Step 7

Remove the middle protective cover.

Step 8

Disconnect the connector on PCB and remove the battery.

Step 9

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt.

Step 10

Pry up the connector and remove the vibration motor.

Step 11

Disconnect connectors on the daughterboard.

Step 12

Remove the plastic mount.

Step 13

Remove the daughterboard.

Step 14

Remove the bracket.

Step 15

Remove the circle clamp holding the charging port.

Step 16

Remove the bracket.

Step 17

Remove the small antennas board.

Step 18

Pry and remove the buzzer (speaker) assembly.

Step 19

Remove the IMEI label.

Step 20

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt.

Step 21

Remove the plastic mount.

Step 22

Disconnect the connector on PCB, and remove the front (selfie) camera.

Step 23

Disconnect connectors on the PCB.

Step 24

Lift up the cable.

Step 25

Remove the PCB.

Step 26

Remove the cover holding the camera connector.

Step 27

Pry up the connector and remove the frame with a main camera and small board.

Step 28

Remove the camera from the frame.

Disassembly Video


Ask a question