en
ru
es
it
fr
de
pt

Teardown difficulty:
Easy

Recommended tools

VERTEX Impress Ra Teardown

VERTEX Impress Ra, Step 1/1 VERTEX Impress Ra, Step 1/2
Step 1

Using the key tool, open the SIM and Micro SD cards tray and remove it.

Warning!

Do not push too hard this may cause damage.

VERTEX Impress Ra, Step 2/1 VERTEX Impress Ra, Step 2/2
Step 2

Open the back cover.

VERTEX Impress Ra, Step 3/1 VERTEX Impress Ra, Step 3/2
Step 3

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 13 bolts in the frame of the phone.

VERTEX Impress Ra, Step 4/1 VERTEX Impress Ra, Step 4/2
Step 4

Lift up and turn the cover (with a speaker) over. The speaker solders to the board with two wires.

VERTEX Impress Ra, Step 5/1 VERTEX Impress Ra, Step 5/2 VERTEX Impress Ra, Step 5/3
Step 5

Unsolder the wires and remove the cover with a speaker.

VERTEX Impress Ra, Step 6/1 VERTEX Impress Ra, Step 6/2
Step 6

Pry and remove the middle frame.

VERTEX Impress Ra, Step 7/1 VERTEX Impress Ra, Step 7/2
Step 7

Disconnect the connector on PCB and remove the battery.

VERTEX Impress Ra, Step 8/1 VERTEX Impress Ra, Step 8/2
Step 8

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the lower PCB.

VERTEX Impress Ra, Step 9/1 VERTEX Impress Ra, Step 9/2 VERTEX Impress Ra, Step 9/3 VERTEX Impress Ra, Step 9/4
Step 9

Pry up the connectors and remove the lower PCB with an inter-board cable.

VERTEX Impress Ra, Step 10/1 VERTEX Impress Ra, Step 10/2
Step 10

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.

VERTEX Impress Ra, Step 11/1 VERTEX Impress Ra, Step 11/2
Step 11

Remove the PCB.

VERTEX Impress Ra, Step 12/1 VERTEX Impress Ra, Step 12/2 VERTEX Impress Ra, Step 12/3
Step 12

Parts are in the frame of the display module.

Disassembly Video


Ask a question