Using a screwdriver (Star Shape 0.8mm Pentalobe), unscrew 2 bolts on the end of the phone.
Using the key tool, open the SIM cards tray and remove it.
Do not push too hard this may cause damage.
Open the back cover.
Pry up the fingerprint sensor connector and remove the back cover,
Remove the cable with fingerprint sensor.
Disconnect the battery connector.
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts.
Pry and remove the buzzer (speaker) assembly.
Remove the battery.
Disconnect connectors on the lower PCB and remove it.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 8 bolts and remove the bracket (holding the vibration motor).
Disconnect connectors on the PCB.
Remove the PCB.
Peel back the inter-board cable.
Pry and remove the coaxial cable and power & volume buttons flex cable.
Pry and remove the earpiece (speaker) and vibration motor.
Parts are in the frame of the display module.