en
ru
es
it
fr
de
pt

Teardown difficulty:
Easy

Recommended tools

Xiaomi Redmi 6 Pro Teardown

Xiaomi Redmi 6 Pro, Step 1/1 Xiaomi Redmi 6 Pro, Step 1/2
Step 1

Using the key tool, open the SIM and Micro SD cards tray and remove it.

Warning!

Do not push too hard this may cause damage.

Xiaomi Redmi 6 Pro, Step 2/1 Xiaomi Redmi 6 Pro, Step 2/2
Step 2

Open the back cover and turn it over.

Xiaomi Redmi 6 Pro, Step 3/1 Xiaomi Redmi 6 Pro, Step 3/2 Xiaomi Redmi 6 Pro, Step 3/3
Step 3

Pry up the fingerprint sensor connector and remove the cover.

Xiaomi Redmi 6 Pro, Step 4/1 Xiaomi Redmi 6 Pro, Step 4/2
Step 4

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts and remove the bracket holding the connectors.

Xiaomi Redmi 6 Pro, Step 5/1 Xiaomi Redmi 6 Pro, Step 5/2
Step 5

Disconnect the battery connector. The battery model of Xiaomi Redmi 6 Pro is BN47.

Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Xiaomi Redmi 6 Pro, Step 6/1 Xiaomi Redmi 6 Pro, Step 6/2
Step 6

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 5 bolts.

Xiaomi Redmi 6 Pro, Step 7/1 Xiaomi Redmi 6 Pro, Step 7/2
Step 7

Pry and remove the buzzer (speaker) assembly.

Xiaomi Redmi 6 Pro, Step 8/1 Xiaomi Redmi 6 Pro, Step 8/2 Xiaomi Redmi 6 Pro, Step 8/3
Step 8

Disconnect connectors on the daughterboard.

Xiaomi Redmi 6 Pro, Step 9/1 Xiaomi Redmi 6 Pro, Step 9/2
Step 9

Remove the daughterboard, also known as sub-board.

Xiaomi Redmi 6 Pro, Step 10/1 Xiaomi Redmi 6 Pro, Step 10/2
Step 10

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts.

Xiaomi Redmi 6 Pro, Step 11/1 Xiaomi Redmi 6 Pro, Step 11/2
Step 11

Open the upper cover with antennas.

Xiaomi Redmi 6 Pro, Step 12/1 Xiaomi Redmi 6 Pro, Step 12/2
Step 12

Disconnect the connector on PCB, and remove the front (selfie) camera.

Xiaomi Redmi 6 Pro, Step 13/1 Xiaomi Redmi 6 Pro, Step 13/2 Xiaomi Redmi 6 Pro, Step 13/3
Step 13

Disconnect connectors on the PCB.

Xiaomi Redmi 6 Pro, Step 14/1 Xiaomi Redmi 6 Pro, Step 14/2
Step 14

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the PCB.

Xiaomi Redmi 6 Pro, Step 15/1 Xiaomi Redmi 6 Pro, Step 15/2
Step 15

Remove the PCB.

Xiaomi Redmi 6 Pro, Step 16/1 Xiaomi Redmi 6 Pro, Step 16/2
Step 16

Disconnect connectors on PCB, and remove two main/rear cameras assembly.

Disassembly Video


Ask a question