en
ru
es
it
fr
de
pt

Teardown difficulty:
Moderate

Recommended tools

Xiaomi Redmi Note 7 Teardown

Step 1

Open the back cover.

Warning!

For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.

Step 2

Pry up the fingerprint sensor connector and remove the cover.

Step 3

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts and remove the bracket holding the connectors.

Step 4

Disconnect the battery connector.

Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Step 5

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 8 bolts.

Step 6

Pry and remove the buzzer (speaker) assembly.

Step 7

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the daughter card.

Step 8

Disconnect connectors and remove the inter-board cable.

Step 9

Disconnect the connector on the daughterboard.

Step 10

Remove the daughterboard.

Step 11

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket holding the connector.

Step 12

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts.

Step 13

Remove the cover.

Step 14

Pry up the connector and remove the fingerprint sensor cable.

Step 15

Disconnect the connector on PCB, and remove the front (selfie) camera.

Step 16

Disconnect connectors on the PCB.

Step 17

Remove the PCB.

Step 18

Disconnect the connectors on PCB, and remove the assembly of two rear cameras.

Disassembly Video


Ask a question