Open the back cover.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 16 bolts in the frame of the phone.
Pry and remove the middle frame.
Pry and remove the buzzer (speaker).
Disconnect the connector on PCB and remove the battery.
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Disconnect connectors and remove the lower PCB.
Disconnect connectors on the PCB.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the PCB.
Remove the PCB.
Pry and remove the power & volume buttons flex and coaxial cables.
Pry and remove the earpiece (speaker).
Parts are in the frame of the display module.