Open the back cover.
Using a screwdriver (hex T5), unscrew 9 bolts in the frame of the phone.
Remove the middle cover and volume buttons keys.
Pry and remove the buzzer (speaker) assembly.
Disconnect the connector on PCB and remove the battery.
Pry and remove the upper cover.
Disconnect the connector on PCB, and remove the main camera.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.
Disconnect the connectors on PCB and pry up the volume buttons flex cable.
Pry up the vibration motor and volume buttons cable.
Remove the PCB.
Parts are in the frame of the display module.