Open the back cover.
Lift and remove the battery.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts in the frame of the phone.
Pry and remove the middle frame.
The middle frame.
Disconnect the connector on PCB, and remove the front (selfie) camera.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.
Disconnect connectors on the PCB.
Remove the PCB.
Parts are in the frame of the display module.
Pry up the connector and turn over the lower PCB.