Open the back cover.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts in the frame of the phone.
Pry and remove the middle cover.
Disconnect the battery connector.
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Pry up the connector and remove the power button.
Disconnect the connector on PCB, and remove the main camera.
Disconnect connectors on the PCB.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the PCB.
Remove the main PCB.
Remove the front (selfie) camera.
Remove the daughterboard.
Parts are in the frame of the display module.