Russian
Spanish
Portuguese
Using the key tool, open the SIM card and MMC card tray and remove it.
⚠️ Warning!
Do not push too hard this may cause damage.
Teardown difficulty:
Easy
Easy
Duration:
14 min
14 min
Recommended tools
Disassembly/Repair of the mobile device Huawei Honor 6C Pro (Huawei Honor 6C Pro (JMM-L22) (ЕМЕА); Honor V9 Play JMM-AL00/AL10, JMM-TL00/TL10 (China)) with each step description and the required set of tools.
Step 2.
Using a screwdriver (Star Shape 0.8mm Pentalobe), unscrew the 2 bolts on the end of the phone.
Step 3.
Open the back cover.
⚠️ Warning!
On the back cover is a fingerprint sensor connected to the main circuit board. Therefore, you need to open it as attentively and carefully, so as not to damage the cable.
Step 4.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket holds the connectors.
Step 7.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket holds the connectors.
Step 8.
Disconnect the battery connector.
⚠️ Warning!
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Step 13.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 screw, and remove the bracket holding the main camera connectors.
Detailed disassembly instructions of Huawei Honor 6C Pro in the video, made by our mobile repair & service center:
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Disassembling\Repair has easy complexity and takes about 14 minutes in time.
Our manual is suitable for all models Huawei Honor 6C Pro — Huawei Honor 6C Pro (JMM-L22) (ЕМЕА); Honor V9 Play JMM-AL00/AL10, JMM-TL00/TL10 (China) released for markets in different countries.
Back to the list