Russian
Spanish
Portuguese
Using the key tool, open the SIM and MMC cards tray and remove it.
⚠️ Warning!
Do not push too hard this may cause damage.
Teardown difficulty:
Moderate
Moderate
Duration:
14 min
14 min
Recommended tools
Disassembly/Repair of the mobile device Huawei Nexus 6P (Huawei Nexus 6P H1511 H1512) with each step description and the required set of tools.
Step 2.
Unstick the upper cover.
⚠️ Warning!
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Step 3.
Unstick the lower cover.
⚠️ Warning!
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Step 6.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket holds the connectors.
Step 7.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts and remove the bracket holds the connectors.
Step 9.
Disconnect connectors and remove the coaxial cable. Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts.
Step 13.
Using a screwdriver (hex T4), unscrew the 2 bolts and remove the brackets securing the micro and cameras.
Detailed disassembly instructions of Huawei Nexus 6P in the video, made by our mobile repair & service center:
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Disassembling\Repair has medium complexity and takes about 14 minutes in time.
Our manual is suitable for all models Huawei Nexus 6P — Huawei Nexus 6P H1511 H1512 released for markets in different countries.
Back to the list