Using the key tool, open the SIM card tray and remove it.
⚠️ Warning!
Do not push too hard this may cause damage.
We find that the language of the content is different from the language of your location.
You can change the language in the upper right corner or stay with the current language
Author, currently - Quality Assurance Specialist
Using the key tool, open the SIM card tray and remove it.
⚠️ Warning!
Do not push too hard this may cause damage.
Disconnect the connectors on the lower board and two small boards above the main PCB and remove them all.
⚠️ Warning!
The lower board connects to two upper boards by two flat cables.
Disconnect the connector and separate the battery. The battery probably glues to the display frame.
⚠️ Warning!
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.