Samsung Galaxy S6 Edge Plus SM-G928

Teardown difficulty:
Hard

Duration:
8 min

Recommended tools

Heat gun

Screwdriver phillips #000

Opening tool / spudger

Tweezers

Disassembly/Repair of the mobile device Samsung Galaxy S6 Edge Plus SM-G928 (Samsung G928F (Europe); G928G (India); G928T (T-Mobile); G928A (AT&T); G928I (Australia, New Zealand, Singapore)) with each step description and the required set of tools.

Vadim Popoff

Quality assurance specialist

Author, currently - Quality Assurance Specialist

Step 1.

Open the back cover.

How to disassemble Samsung Galaxy S6 Edge Plus SM-G928, Step 2/1

How to disassemble Samsung Galaxy S6 Edge Plus SM-G928, Step 2/2

Step 2.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 18 bolts in the frame of the phone.

How to disassemble Samsung Galaxy S6 Edge Plus SM-G928, Step 3/1

How to disassemble Samsung Galaxy S6 Edge Plus SM-G928, Step 3/2

Step 3.

Using the key tool, open the SIM and Micro SD cards tray and remove it.

⚠️ Warning!

Do not push too hard this may cause damage.

How to disassemble Samsung Galaxy S6 Edge Plus SM-G928, Step 4/1

How to disassemble Samsung Galaxy S6 Edge Plus SM-G928, Step 4/2

Step 4.

Pry and remove the middle frame.

Step 5.

The middle frame.

How to disassemble Samsung Galaxy S6 Edge Plus SM-G928, Step 6/1

How to disassemble Samsung Galaxy S6 Edge Plus SM-G928, Step 6/2

How to disassemble Samsung Galaxy S6 Edge Plus SM-G928, Step 6/3

Step 6.

Disconnect the battery connector.

⚠️ Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

How to disassemble Samsung Galaxy S6 Edge Plus SM-G928, Step 7/1

How to disassemble Samsung Galaxy S6 Edge Plus SM-G928, Step 7/2

How to disassemble Samsung Galaxy S6 Edge Plus SM-G928, Step 7/3

How to disassemble Samsung Galaxy S6 Edge Plus SM-G928, Step 7/4

How to disassemble Samsung Galaxy S6 Edge Plus SM-G928, Step 7/5

Step 7.

Disconnect connectors on the PCB.

How to disassemble Samsung Galaxy S6 Edge Plus SM-G928, Step 8/1

How to disassemble Samsung Galaxy S6 Edge Plus SM-G928, Step 8/2

How to disassemble Samsung Galaxy S6 Edge Plus SM-G928, Step 8/3

Step 8.

Lift the board up, disconnect the connector from the inside and remove it.

How to disassemble Samsung Galaxy S6 Edge Plus SM-G928, Step 9/1

How to disassemble Samsung Galaxy S6 Edge Plus SM-G928, Step 9/2

Step 9.

Pry and remove the earpiece (speaker) and cable with a microphone and proximity sensor.

How to disassemble Samsung Galaxy S6 Edge Plus SM-G928, Step 10/1

How to disassemble Samsung Galaxy S6 Edge Plus SM-G928, Step 10/2

Step 10.

Pry and remove the vibration motor.

How to disassemble Samsung Galaxy S6 Edge Plus SM-G928, Step 11/1

How to disassemble Samsung Galaxy S6 Edge Plus SM-G928, Step 11/2

How to disassemble Samsung Galaxy S6 Edge Plus SM-G928, Step 11/3

Step 11.

Parts are in the frame of the display module.

Detailed disassembly instructions of Samsung Galaxy S6 Edge Plus SM-G928 in the video, made by our mobile repair & service center:

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

#instructions #Samsung #Samsung Galaxy S6 Edge Plus SM-G928

Evgenii Kuzmin

Senior maintenance service and repair engineer

Disassembling\Repair has hard complexity and takes about 8 minutes in time.
Our manual is suitable for all models Samsung Galaxy S6 Edge Plus SM-G928 — Samsung G928F (Europe); G928G (India); G928T (T-Mobile); G928A (AT&T); G928I (Australia, New Zealand, Singapore) released for markets in different countries.

Back to the list