Open the back cover.
⚠️ Warning!
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
We find that the language of the content is different from the language of your location.
You can change the language in the upper right corner or stay with the current language
Author, currently - Quality Assurance Specialist
Open the back cover.
⚠️ Warning!
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Using a screwdriver (hex T5), unscrew 2 bolts and a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.