Hi, it's difficult to say I'm not often come across with schematic with depicted wifi / GPS lines. But, I can say for sure the wifi lines locate in a few different places.
I know this is old,but I was wondering where you'd fix the inverted color problem with this. I have tried so many videos and such and nothings helped with the Alcatel tab. So please,PLEASE reply back and I'd be the happiest girl. :)
Thank you for such fast replay :) These are those golden circle points you can see on motherboard, on other tablets they are labeled, but on this tablet they aren't. GND is ground and COLO (KOLO, CKOLO) should be test point (if I'm not mistaken). My PC doesn't recognize my tablet when I connect it, so I need to connect these two points so that the tablet will get recognized, but since they aren't labeled there's a chance that I connect the wrong points and short something out. That's why I asked if you maybe know where those two points are?
Ok, we know about this one. Unfortunately our main speciality isn't linked with firmware and etc. just a mechanical repair. Our a firmware consultant went on vacation and can't help. Maybe someone (on our channel) will behold this question and will help you.
+Scopes Chillin ; I found an ALCATEL model: P310A one touch and took it apart to look for water damage and it has (4) four little magnets stuck in different places on the main board and on the side, they are pretty powerful little magnets about 1/2"L x 1/8" W. Have you found any information on them ? The tablet seems to function without them installed .
Vremonte,Thank You for your reply. Yeah, I found out after calling a place here in the States called "UBreakiFix", and the guy said the magnets were used to hold the tablet to a smart pad or cover. Makes sense,lol !!!
Jose Alcivar15
2020-04-09Mehmet Alp12
2019-08-03roger izaguirre3
2017-07-19hopeless1
2017-06-30tmax4505
2017-03-27Melody Rodriguez18
2016-10-30Red17
2016-07-30Marko Vrtarić11
2016-06-28tyheshat2916
2016-04-15Martin Reza6
2016-04-13