Hi, I have the LG G2 D800 (US version) phone and need to replace a non...

i

LG G2 D802
Hi, I have the LG G2 D800 (US version) phone and need to replace a non...

Hi, I have the LG G2 D800 (US version) phone and need to replace a non-working digitizer. I took the screen assembly out, but I don't understand how to separate the digitizer from the LCD. They seem to be glued together very well. You have a video for LG G2 mini D618. It looks simple, but mine is impossible to separate. There is a video https://www.youtube.com/watch?v=eTKV0RRv2IU showing how difficult it is. Is there a better way? How do I clean the LCD? Should I use LOCA glue and UV light for the new digitizer? Thanks.
    i
    ilya
    Hi, I have the LG G2 D800 (US version) phone...
    Ok, I separated the digitizer from the LCD. I used a rework station (heat gun) heating up a corner slightly and then was able to insert a plastic film. After that I found that playing cards are very helpful to continue. I did not find the answer what is best for cleaning. Acetone? Isopropyl alcohol? I am concerned about creasing the LCD. Now I understand that new LOCA glue and UV light are needed.
    Evgenii Kuzmin
    ilya
    Hi, I have the LG G2 D800 (US version) phone...
    Hi, it has two different options to perform this. Unfortunately both demand a lot of experience. So, we reccomend to buy a display module (display and touchscreen as entire part). Again, in our practice we come across with touchscreen malfunction after replacement in 50 percent of cases.

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

Reply

Are you sure you want to delete this question(comment)?

˄˅

Advertisement

˃˂

Advertisement