Would be great to see how to replace the fingeprint sensor and camera if you need to replace the battery cover (which broke while operning in my case, I bought a new one and now I am stuck how to replace the camera and fingerprint sensor on backcover)
Hi, I guess, it has a chance to do it wrong and break the display, but if you put the phone on a soft surface, the chance to break the display goes to 0. You know, you will open the back cover, remove the middle cover, and will see the sub-board with a charging port. My point is there is no connection with the display. No, of course, you can pry the sub-board up so hard that break the display from inside. Do it carefully that's all.
Hi sir,
Do you happen to know how is the ear speaker on a Nokia 7.1 TA 1095 connected? i see this rectancle component but there are no cables and it does look like there is some cobber things that needs to make contact with something but i cannot see what that should be.
The middle cover covering the mainboard has been glued to a cable that transmits signals to the speaker from the board. This cable connects two pins on the board to two speaker pins.
It is necessary to check that all the spring contacts press to the pads and that the cable has also been indamaged.
M W11
2019-11-30M W19
2019-11-30JARS Sotoluján2
2020-01-13Ibrahim Hassan6
2020-04-18Andy Dawson3
2020-04-20Sugeet Sunder7
2020-06-22Sascha Blank12
2020-06-23Melvorgazh8
2020-09-17Herminigildo Herminigild…
2020-09-28Ronnie Jorgensen
2021-08-17