Menu
Search
Ask a question Notifications
Avatar
English
Russian
Spanish
Portuguese

The most frequently asked questions about Nokia 7.1 TA-1095 from our audience.

Evgenii Kuzmin

Repair engineer for the last fifteen years. Huge experience in the repair of electronic devices and gadgets.

Nokia 7.1 TA-1095
I

Nokia 7.1 TA-1095
Is the battery glued in place or easy replaceable?

Is the battery glued in place or easy replaceable?
Reply
Collapse Expand
    M
    Ibrahim Hassan6
    Is the battery glued in place or easy replaceable?
    Ibrahim Hassan it is glued but you can get it out if you’re careful. A new on is cheap on eBay.
    Reply
S

Nokia 7.1 TA-1095
Would be great to see how to replace the fingeprint sensor and camera ...

Would be great to see how to replace the fingeprint sensor and camera if you need to replace the battery cover (which broke while operning in my case, I bought a new one and now I am stuck how to replace the camera and fingerprint sensor on backcover)
Reply
M

Nokia 7.1 TA-1095
how to replace broken screen?

how to replace broken screen?
Reply
J

Nokia 7.1 TA-1095
I used a T5

I used a T5
Reply
A

Nokia 7.1 TA-1095
Hi and thanks for the video, please could you tell me how much of the ...

Hi and thanks for the video, please could you tell me how much of the phone I need to dismantle just to replace the battery. Thank you. Andy.
Reply
M

Nokia 7.1 TA-1095
what if we dont have heat gun?

what if we dont have heat gun?
Reply
Collapse Expand
    Evgenii Kuzmin
    M W11
    what if we dont have heat gun?
    Hi, better to go to a specialist or you can use sandbag warmed in microwave oven or a hairdryer
    Reply
    Collapse Expand
      a
      Evgenii_Kuzmin
      Hi, better to go to a specialist or you can...
      Use a hair dryer
      Reply
      Collapse Expand
        M
        abitrubbish18
        Use a hair dryer
        @abitrubbish i didnt have heat gun so i used clothes iron
        Reply
        Collapse Expand
          M
          M W3
          @abitrubbish i didnt have heat gun so i used...
          @VRM24.com I replaced charging port(i mean complete charging pcb) and now mobile is discharging when connected to charger?
          Reply
M

Nokia 7.1 TA-1095
Hi! A technician told me there was a risk of damaging the screen durin...

Hi! A technician told me there was a risk of damaging the screen during the replacement of the USB-C port. Do you confirm it? How tricky is it? Cheers
Reply
Collapse Expand
    Evgenii Kuzmin
    Melvorgazh8
    Hi! A technician told me there was a risk of...
    Hi, I guess, it has a chance to do it wrong and break the display, but if you put the phone on a soft surface, the chance to break the display goes to 0. You know, you will open the back cover, remove the middle cover, and will see the sub-board with a charging port. My point is there is no connection with the display. No, of course, you can pry the sub-board up so hard that break the display from inside. Do it carefully that's all.
    Reply
    Collapse Expand
      M
      Evgenii_Kuzmin
      Hi, I guess, it has a chance to do it wrong...
      @VRM24.com Waaoww! Thanks a lot. Shall tell that to the technician then. He probably isn't a Nokia specialist and I know nothing. Thanks again 🙂
      Reply
S

Nokia 7.1 TA-1095
Where is the gyroscope sensor located? Is it possible to get it replac...

Where is the gyroscope sensor located? Is it possible to get it replaced?
Reply
H

Nokia 7.1 TA-1095
I have a loose charging port. How does one replace this? What do i nee...

I have a loose charging port. How does one replace this? What do i need? Which charging port do i change?
Reply
r

Nokia 7.1 TA-1095
Hi sir, Do you happen to know how is the ear speaker on a Nokia 7.1...

Hi sir, Do you happen to know how is the ear speaker on a Nokia 7.1 TA 1095 connected? i see this rectancle component but there are no cables and it does look like there is some cobber things that needs to make contact with something but i cannot see what that should be.
Reply
Collapse Expand
    Evgenii Kuzmin
    ronnie
    Hi sir, Do you happen to know how is the...
    The middle cover covering the mainboard has been glued to a cable that transmits signals to the speaker from the board. This cable connects two pins on the board to two speaker pins. It is necessary to check that all the spring contacts press to the pads and that the cable has also been indamaged.
    Reply

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

Reply

Are you sure you want to delete this question(comment)?

Delete × Cancel
˄˅
˃˂