Samsung Galaxy A5 SM-A500 Q&A

User questions and answers about Samsung Galaxy A5 SM-A500 - tips, troubleshooting, and real experiences from the community.

Question 🤔 92 0
hello. if i dropped my A5 in the water and the screen is black and won't turn on but the phone is working though, what should i do?
Answer 😉 84 0
Hello, the phone have to be disassembled as a battery must be disconnected, the best if repair will do a good specialist. After, clean all from water and rust and make test the phone on performance (detecting fault)
Question 🤔 87 0
thanks for the video, it was EXTREME helpful repairing my A5 broken screen. also, i suggest to be VERY careful when detaching the screen from the body, in particular where the soft keys are placed. i was not so careful and i didn't noticed that the back key sensor was still glued to the screen, so i teared the key's flat cable. so, i had to replace also the charging board. cheers, and happy repairing!
Answer 😉 75 0
Hello, thank you too for the correct remark! It'll be helpful for all of us. Have a nice day!
Question 🤔 88 0
I have the Samsung a5 sm-500w and I wanted to buy the front screen cover but please tell me the LCD or touch screen is stuck together so why are they selling it ? I mean I should not buy it then right ? or go for the touch screen? the front screen cover is like 5$ but my LCD is fine
Answer 😉 77 0
Hello, The full part composed of a glass and touch screen and lcd. You can replace the glass only. If touch screen or display get damaged then you have to replace the full part.
Question 🤔 83 0
My mobile works normally opens and works buttons normally but the screen is black the extra you're wearing;
Answer 😉 78 0
Hello, it has two reasons or the connector of display flex cable is fell off or the display matrix is broken. For example, I would look at the display surface at angle to detect cracks.
Question 🤔 88 0
Is this the same screen for the A5 A500FU?
Answer 😉 76 0
Hello, A500fu An european version with single sim the screen have to identical
Question 🤔 86 0
At how many degrees should the air be kept and for how long?
Answer 😉 77 0
Hi, https://youtu.be/2wU2Am8vd0w This video is a more correct, temperature 80C, heating time 50 minutes - 1 hour. It's very complicated to do with a heat gun which is why we use special things like a heated surface separator. The separation of liquid crystals on this phone is the most difficult task, the chance of doing it at home without experience is equal to 0. I mean the screen will be broken. This video is a more correct, temperature 80C, time of heating 50 minutes - 1 hour. It's very complicated to do with a heat gun which why we use special things as a Separator with heated surface. The separation of lcd on this phone is the most difficult task, the chance to do it at home without an experience is equal to 0. I mean the screen will be broken.
Question 🤔 93 0
How hot should the heatgun be?