Sony Xperia Z3 Plus Q&A

User questions and answers about Sony Xperia Z3 Plus - tips, troubleshooting, and real experiences from the community.

Question 🤔 260 0
What adhesive did you use? And where can I buy it from?
Answer 😉 255 0
Hello, it's the sealant B7000. Where you can buy it? I think all over the world. For example http://www.ebay.com/itm/1PC-110mL-Glue-B-7000-Adhesive-Sealant-Glue-for-Clothes-Shoes-Jewelry-Seal-Phone-/221973681854
Question 🤔 262 0
can you also use b7000 for the back cover?
Question 🤔 260 0
Hello, can you tell me where can i order the orange clip for the Display. Or can you tell me the name of it. Thax.
Answer 😉 256 0
Hi, just the clamps, you can buy anywhere - amazon, ebay, aliexpress and so on.
Question 🤔 260 0
Good evening I have the z3 plus, it fell and the glass broke a little at the top. Besides that, the touch from the middle upwards no longer works even though the display didn't suffer any damage... Is it necessary to change everything? or can it be done like in most phones, just change the touch and that's it. I await your response, thank you very much
Answer 😉 253 0
Hi, it's difficult to replace only the touch screen, without equipment and skills, preferably if it will be replaced completely.
Question 🤔 140 0
that dual sim or single sim..?
Answer 😉 129 0
Hi, It's no matter for this work. In this video, the phone with two sim cards.
Question 🤔 28 0
Where can I buy a battery for my Sony Xperia Z3 Plus, because I bought one on Mercado Livre and it was no good!
Question 🤔 31 0
Help my screen can't touch
Answer 😉 19 0
Hi, why?
Comment 🫣 19 0
@VRM24.com Someone hit me and my phone drop
Comment 🫣 19 0
@Sensugarren You broke the digitizer probably - I had the same situation. It alsost look perfect but if you see closer - the screen can have a line through one side to another the result is that the touch doesn't work and you have to replace the digitizer or a whole screen like in the video
Question 🤔 26 0
My replaced Sony screen is letting light come out through sides at the bottom half of my phone how can I fix this? Can I use a glue and try to get it in or does it have to be a specific glue? And will it work?
Answer 😉 15 0
Hi, okay. It's better, to use a sealant b7000 but edges are thin and glue it, will be difficult. It's about the goal - edge & light. If the display module is not white use a black sealant. Also, if you spilled the sealant too much, you could damage a backlight and black spots will be seen under the display.
Question 🤔 26 0
after the screen change can the phone be submerged again?
Answer 😉 15 0
Hi, what do you mean? Where should it be submerged to?
Comment 🫣 15 0
@VRM24.com I mean this phone has IP 68 certification which makes it capable of submerging it in water as well as resisting dust the question is whether and once the screen is changed, the ability to put it in the water is lost
Comment 🫣 15 0
@victor de la hoz cordoba Okay, I've read the requirement to use your model. "It’s protected against immersion for up to 30 minutes in fresh (non-saline) water at depths of around 1.5 meters" and so on. After the replacement, you will lose the Sony warranty, and if the job is done properly it will still be waterproof in 55% of cases and 35% will protect the phone from rain. And 10% if something goes wrong, complications, or else. For example, a phone has a dent on display frame, a specialist tapping down and leveling it, glues the display and even if he did all right, it has a chance to find a formed gap in this place.
Comment 🫣 15 0
Ok Bro ..Thank for your explication
Question 🤔 27 0
How's it going? Can I replace the main board of the e6533 with that of the e6553? Thanks in advance.
Answer 😉 18 0
Hi, Because the E6533 has two SIM cards, you must also replace the middle frame (housing).