The most frequently asked questions about Xiaomi Pocophone F1 from our audience.

Load more

Repair engineer for the last fifteen years. Huge experience in the repair of electronic devices and gadgets.


Xiaomi Pocophone F1

Dmitry Trifonov

Xiaomi Pocophone F1
Looks like you have …

Looks like you have to use Torx T3 (not T2)
    Evgenii Kuzmin
    dmitry6
    Looks like you have to use Torx T3 (not T2)
    Hi, why that? In our video, a specialist uses a (Yahun) screwdriver Torx T2. It is not a mistake. Sometimes a socket screw or a screwdriver has a different size because of brands even if they are both T2 or T3. Anyway, this information must be taken into account before the repair.
AngelFntn

Xiaomi Pocophone F1
Hello, i have a …

Hello, i have a problem with my 3.5 jack port, so i want to replace it. I found the right component on aliexpres, but i dont know how it works, on the others xiaomi phones, there are some solder pins, but on the pocophone f1's, there aren't. So i guess its just clipped on. Can you explain me how is the jack 3.5 port assembled on the phone, and how to replace it, before i buy the component and the tools.
    Evgenii Kuzmin
    angelfntn
    Hello, i have a problem with my 3.5 jack port, so…
    Hi, you need to use a soldering iron because the jack is soldered to PCB as and experience/skill to use it.

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

Load more
Reply

You should type at least 3 chars or leave textarea empty and attach image below.

Supported image formats are: jpg, bmp, png, gif