ZTE Blade V6 Q&A

User questions and answers about ZTE Blade V6 - tips, troubleshooting, and real experiences from the community.

Question 🤔 238 0
my SIM card got stuck in the phone. I removed the little cover with the memory but the SIM stayed inside...what can I do?
Answer 😉 227 0
pepe pep the same thing happened to me!
Question 🤔 240 0
Which hardware there is responsible for calls, gps and so on?
Answer 😉 227 0
Hi, what do you mean 'hardware'? Because the calls comprise of parts as a speaker, a buzzer, microchips as and GPS has, too. And all parts are responded to work.
Comment 🫣 227 0
i mean which "thing" in the phone is responsile for that? because if someone calls me and i take the call, he only hears a weird sound like the one which you hear when a jamming transmitter is near you. But i can make voice mails in whatsapp...so my mic is ok I would be really thankfull if someone would know what the problem is
Question 🤔 244 0
Hi, please my phone got in water and I have left it to dry for a long time but it is still not coming on. what can I do to make it work again. I have some important information on it that will be painful to lose. please help me out. thanks.
Answer 😉 234 0
Hi there, at first, you have to take off the battery or disconnect the flex cable. After that disassemble the phone and inspect all parts for oxidation then clean up (with isopropyl alcohol or something like that) the parts that have been oxidized. Now, You can start (turn on) the phone up and check what is work or what is doesn't.
Question 🤔 236 0
mine doesn't charge, it only reaches 10% and doesn't go past that, it just discharges again little by little... I don't know if it's the port where the charger goes in or if it's the battery that's no good.. and I don't know whether to pawn it or repair it
Answer 😉 227 0
Hi, we can't recommend that you pawn the phone or repair it, but if you want to know the reason for the fault, we would replace the battery at first. in English We can't recommend you pawn the the phone or repair it, but if you want to know the reason of fault, we'd be replaced the battery at first.
Question 🤔 241 0
my zte blade v6 only charges up to 22% and doesn't go any further... besides that it only charges when turned off what can I do 😔
Answer 😉 225 0
Hi, at first you have to replace the battery (or simply connect a new one for the test) the next step will be the replacement of a power controller. ... at first you have to replace the battery (or just connect a new one for test) the next step will be replacement a power controller.
Question 🤔 238 0
Whats the name of the tools?
Answer 😉 226 0
Hello, an opening tool, screwdriver 1,5 (cross-head) and tweezers
Comment 🫣 226 0
Thank you
Comment 🫣 226 0
👌
Question 🤔 236 0
what I want to know is how the hell it opens to put in an SD Card
Answer 😉 226 0
jeff the killer? :v okno in the tray where the chip is placed
Question 🤔 237 0
sorry, my zte got wet and I let it dry, then I checked the camera and it tells me that it is open by other applications .what could I do in this case
Answer 😉 227 0
I already formatted it but the flash doesn't work, but the front camera does work
Comment 🫣 227 0
Hello, at first, you have to disassemble the phone and clean the motherboard. It help to detect fault or even camera will work on spanish Hola, en primer lugar, hay que desarmar el teléfono y limpiar la placa base. Ayudar a detectar la falla o incluso cámara funcionará
Question 🤔 236 0
hey friend. on my zte the volume and power buttons don't work. I've seen that it's because the button board is not connected with the orange ribbon. Could you tell me how I can fit the orange ribbon into the button board?
Answer 😉 229 0
hello, we usually solder the flex cable or restore it. I'll try to express it on spanish :) hola, por lo general soldar el cable de la flexión o recuperarlo.
Question 🤔 238 0
hello! great video. just a question. can i reach the volume buttons without having to Disassemble the whole phone? only my down volume fails since it fell down once but if i press hard enough it works. thanks in advance!
Answer 😉 229 0
Hello, as the minimum (least) you have to open the back cover. It may be enough to correct or replace the button.
Comment 🫣 229 0
Thanks man. Ill try it soon really need it. Not enought videos about this model.
Comment 🫣 229 0
Ok, anyway write us if you need more information about repair, we'll try to help