Hello, I took my ZTE Nubia mini S to a repair shop to replace the screen that was broken, now the phone no longer turns on when the battery is connected to the board, can you tell me if it's the battery that has a problem? It was good, the phone now just stays with a black screen and the notification button blinking, the technician claims a battery problem, but it was great, it lasted 2 days without charging.
If you disconnect the battery from the cover, plug in the charger and try to turn it on, the Nubia symbol appears and it shows charged 100%, with the battery it doesn't turn on. What would it be?? Could the technician have ruined my phone? Thanks!!
Hi, I need to ask, without the battery of this phone, when it's plugged into a charger, does it turn on?
in English, I need to ask, without the battery that phone, when it's plugged into a charging, turns on?
vremonte24.ru this, without the battery it turns on but does not start the system, the nubia symbol appears and then 100% charged. with the battery nothing appears, the notification light keeps blinking and the screen is black
it turns on without battery when plugged into power, shows the nubia simbol and charged status. with the battery the screem keeps black and blinks the red status light.
thanks for answering
sir my nubia z11 charging slot damaged one person make fraud saying that we must open display to change c type pin n display breaks in compulsorly n took my mobile giving 5000 is that true to open display?By seeing ur video this is not a big problem to open mobile,he frauded me plzz reply about it sir is it a simple task or big issue to repair it
Hello, okay, the port is soldered to the flat flex cable which is located between the battery & the LCD's frame and connects to the PCB. For the replacement, you have to warm up the battery and separate it from the frame carefully. Remember, under the battery at least two cables.
sorry for my english, i want to know if to separate the battery, i 've to disassemble all the component, such the camera ecc ecc . I saw in the video that it's the last compononent to be removed...tnx
No, you shouldn't, but it help you to pry the battery carefully. Also, it'll give you some space. Usually, the battery glued hard, you need use a heat gun or a thin plastic sheet with isopropyl alcohol.
My power and volume buttons stopped working I don't know why maybe they need cleaning what do you think do you have any idea what could be the reason and if so do you have a solution and thanks
Rodrigo Mena17
2017-09-03Eliana Löw5
2017-11-19Bruno Gabrielli5
2018-02-18Tarun Electricals2
2018-04-08ArcticIce5
2018-06-01Himani Saini15
2018-07-16Tommaso Tescione7
2018-10-11HUGO DIAZ18
2018-11-07Utube Aandh8
2020-11-07Richard Kaz4
2020-11-29