Using the key tool, open the SIM and Micro SD cards tray and remove it.
⚠️ Warning!
Do not push too hard this may cause damage.
To ask the question please sign in with one of your existing third party accounts.
To get notifications please sign in with one of your existing third party accounts.
Please sign in with one of your existing third party accounts.
We find that the language of the content is different from the language of your location.
You can change the language in the upper right corner or stay with the current language
Author / Content specialist with 10+ years of experience
Using the key tool, open the SIM and Micro SD cards tray and remove it.
⚠️ Warning!
Do not push too hard this may cause damage.
Separate the display module from the cover.
⚠️ Warning!
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holding the connectors.
Turn over the display module, and using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket holding Home button connector.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Disassembling\Repair has hard complexity and takes about 13 minutes in time.
Our manual is suitable for all models Nokia 8 TA-1004 released for markets in different countries.